Portable Lightweight 2300 Watt Gas Generator Inverter Digital LED Fuel Gauge

Description

DETAILS
The A-iPower SUA2300i provides efficient, clean, quiet 2,300 watts of starting power and 1,800 watts of running power. Powered by a potent, 4 cycle, OHV, 79cc A-iPower engine, the generator is ideal for outdoor events such as racetracks, concerts, camping trips, tailgating parties, RVs, home applications and many other applications.
Featuring a BUILT IN mobility kit with telescopic handle and flush wheels – the smelt 50# net weight is hardly noticeable, allowing you to take portable power wherever you go. At 58 dBA @ 50% Load – 21’ / 7m, you are assured quiet operation that won’t annoy your neighbors.
With Inverter technology, you are using clean power, meaning it’s safe for electronics such as televisions, tablets, laptops, and other power sensitive equipment. The inverter module converts the raw power from DC to AC output. The engine speed varies depending on electrical demand, which also significantly reduces noise and fuel consumption.
The SUA2300i also has parallel capability. With the included parallel cables, two generators can link for nearly double the power. No additional and expensive external junction boxes needed for this unit!
The generator also features a multi-switch to integrate the start, run and stop functions. This switch operates fuel on/off, choke on/off, engine on/off which provides convenient and easy starting and operation. A DIGITAL fuel gauge on the fuel tank helps remind you when you need to refuel.
Equipped with a DC adapter plug AND a separate USB port you can conveniently charge your battery or cell phone with a USB adapter.
Weights less than the Predator 2000 inverter generator and 50+ pounds less than the Predator 3500 inverter generator.
SPECIFICATIONS
Model
SUA2300i
Run Time at 1/2 Load
6.5 hr
Rated Voltage & Frequency
120V / 60Hz
Running VAC Amperage
15A
Rated Output (Running)
1800W
Alternator Brand
Senci
Automatic Voltage Regulator
Solid State, Digital Inverter Technology
Enigine Brand
Senci
Engine (OHV)
4-Stroke (SENCI)
Engine Displacement
79cc
Bore X Stroke (mm)
48.6 x 43 mm
Engine RPM
3600 – 5300
AC Load
100%
Phase
Single
Recommended Oil
SAE 10w-30
Lubrication Method
Splash Sump
Choke Type
Manual
Fuel Tank
1.1 Gal / 4.2 L
Fuel Gauge
Yes – Digital
Starting Method
Recoil
Low Oil Shut-Off
Yes
Oil Capacity
.4 Qt / .4 L / 13.5 Oz
Low Oil Alert Light
Yes
Compression Ratio
8.5:1
Ignition Type
CDI
Run Time at Full Load
4 hr
LCD Hour Meter
Yes
DC Volts
12V 8A Multifunction Port
Receptacle Details (Type and Rated Amps)
(1) 120V 30A Locking (L5-30R), (1) 120V 20A Duplex (5-20R)
Weather Protection on Outlets
No
Circuit Breaker
No
Muffler, Spark Arrestor
Yes
Frame Thickness
12.5 mm
Mobility Kit
Yes – Telescopic Handle with Built In Wheels
Battery Details
N/A
Noise Level - dBA
58 dBA @ 50% Load – 21’ / 7m, 68 dBA – 75% Load @ 21’ / 7m
THD (Total Harmonic Distortion)
3% or Less
Emissions
EPA / CARB
Included Accessories
Oil, Parallel Cable, RV Adpater, Manual, Quick Start Guide, Tool Kit
Net Weight
50.7 lb / 23 kg
Size Dimensions (L*W*H) (in./mm)
22.0 x 13.9 x 20.8 In. / 550 x 355 x 530 mm
Nature's Generator Power Pod Powered Portable Generator HKNGPD
Nature's Power Pod is made with a 100Ah built-in SLA battery that is maintenance free
Front control panel includes 1 x solar panel input, an LED battery fuel gauge and 1 x 12-Volt DC outlet
The units back panel houses a built-in 600V/175A expansion port for connection of the nature's generator in essence
connection of the nature's power pod to the nature's generator helps provide larger energy storage and run time
Compartment on the top of the unit also provides a convenient storage space if needed
Get to Know Your Nature's Generator
What You Can Get
1×Nature's Generator Power Pod;
1×Accessory Box;
1×35 inches expansion cable( in the top cover of the Nature's Generator Power Pod);
1×User Guide.
We have provided accessory box to install your Nature's Generator Power Pod on top of Nature’s Generator.
Dimensions and Weight
Dimensions and Weight:
18 x 12 x 15 inches;92Ib.
Smart Key:
Install “Nature’s Pulse” app and plug smart key to the top USB port with Bluetooth icon on its right side.You can use the APP to monitor your Generator and store daily electricity data.
Front Panel
LCD Display:
LCD display shows the information of the system.
LCD Display Button:
Press it to light up LCD display for 30 seconds.
Get to Know Your Nature's Generator Power Pod
Dimensions and Weight
Dimensions and Weight:
18 x 12 x 15 inches;92Ib.
We have provided accessory box to install your Nature's Generator Power Pod on top of Nature’s Generator.
How to Connect to Nature's Generator
There is an expansion cable in the top cover of the Nature's Generator Power Pod.Connect the expansion cable to the expansion port which on the back of the Narture's Generator.
LED Light
LED Light Button:
Press it to show the battery charge level.
LED Lights:
The first light will show green,which indicates 20% charge. The second light will show green, which indicates 40% charge, the third light will show green which indicates 60% charge and the fourth light will show green which indicates 80% charge
and finally the fifth light will show green which indicates a 100% charge.
How to Connect Your Nature's Generator Power Pod to Nature’s Generator
1. Open the top cover of the Nature's Generator Power Pod, locate the expansion cable, and run the expansion cable out of Nature's Generator Power Pod through the opening on the back of the Nature's Generator Power Pod.
2. Locate expansion port on the back of your Nature’s Generator and open the rubber cover.
3. Connect the expansion cable to the expansion port. Due to the amount of voltage running between the Nature's Generator and Nature's Generator Power Pod, this is a very tight fit to ensure no electrical shock while connecting.
4. The Expansion (chain link) Icon will be illuminated on the display of Nature’s Generator to indicate Nature's Generator Power Pod is connected.
Get to Know Your Nature's Generator Solar Panel
Dimension and Weight
42 x 29 x 3 inches;36Ib.
Using lightweight anodized aluminum frame with cable management system and wheels for easy transport.
High in Performance
Polycrystalline Solar Panel Provides up to 100W of Recharging Power.We use 50 foot UL approved 12 AWG pure copper cable to improve conversion.
Tips in Using
1.You can use the four eyebolts to
anchor the solar panel to the ground.
2.You can turn star knob clockwise
to stop the wheel or countercolockwise to release.
High in Performance
Solar panel have three angles that can be adjusted to take full advantage of sunlight.
Get to Know Your Nature's Generator Wind Turbine
What You Can Get
1× Nature’s Generator Wind Turbine Main Body;1×Hub;1×Nose cone;5×Blades;1×100ft Cable;1×Controller box;1×User Manual;1×Accessory bag(You need install the wind turbine by yourself)
Made Materials
Wind turbine blades are made of fiberglass nylon composite;Wind turbine body is made of cast aluminum alloy with powder coating;Wind turbine cable is made of 12AWG pure copper cable.
Complete Electrical System
The Nature’s Generator Wind Turbine comes with 100 ft cable and controller box. It is a complete electrical system to recharge your Nature’s Generator.
Power Ratting
27 mph or 12 m/s wind speed rated mechanical power;150W rated electrical power;110 mph maximum wind speed.
Get to Know Your Nature's Generator Power Transfer Kit
What You Can Get
1×Power Transfer Switch;
1×Conduit;
1×Power Cord;
3×Cable Clamps;
1×Installation Manual;
1×User Manual;
Pay Attention
The Power Transfer Kit only works on 110V. It is not compatible with 220V.
To maximize the efficiency of your generator, divide appliance circuits and others requiring higher wattage between adjacent circuit selector switches of the transfer switch so that a usage balance is achieved between the opposing legs of the generator power.
Where to Install
The size of Power Transfer Switch is 13 1/4 x 8 x 4 3/4 inches. The conduit is approximately 18 inch with the clamps. It is recommended to install it in a close area to your breaker panel.
The Nature's Power Pod can be used independently or in conjunction with Nature's Generator. It comes with an internal 100Ah Sealed Lead Acid battery that can be recharged through the solar panel input on the front of the unit. The front of the unit also include an LED light fuel gauge to let you know the units level of charge as well as a 12V DC outlet. The Nature's Power Pod also comes with a top compartment where the fuse connector for expansion purposes is stored. It can also help store any other items that you may want to keep handy with your unit.