Godin Concert CW QIT Natural Gloss

Description

Concert CW QIT
SKU:
049653
Made in Canada
5.00
Map: 9.00
The Godin Concert CW QIT is the top-of-the-line of the mahogany/cedar models. It features the Custom Polished finish that is buffed down to a highly responsive high gloss finish
Specs Brand
Back and Sides
Solid Mahogany
Top
Solid Cedar Top
Neck
Fingerboard
Fingerboard Radius
24" (609.6 mm)
Scale Length
25.66" (651.764 mm)
Nut Width
2" (50.8 mm)
Nut Type
Graphtech
Frets
19
Machine Head Ratio
14:1
Bridge and Tailpiece
Bridge Electronics
Controls
On-Board Preamp
Used Huss & Dalton Model CM Natural 2008
PLEASE CONTACT US WITH ANY QUESTIONS OR FOR AN IN-HAND DESCRIPTION
The Huss and Dalton CM model is perfect whether you are a songwriter needing an inspirational writing tool or a discerning finger stylist, or perhaps a blend of both. Though somewhat smaller than a dreadnought and with deep sides at 4 5/8", it really packs low-end warmth and response. The elegant design includes a soft Venetian cutaway, body and fretboard bindings of figured maple, an abalone rosette, and an understated 12th-fret scroll fretboard inlay in abalone. The Huss & Dalton CM will give you the full tonal spectrum, as well as the reach to achieve the most complex melody. Pro set up included.
Cosmetic Condition: A few minor dents & dings; various surface scratches, but pretty clean overall.
Neck: Soft V-shaped mahogany neck with flame maple binding & black side-dots. Ebony fingerboard with abalone scroll inlay in the 12th fret. Frets show just a tiny bit of wear, but have plenty of life in them. Huss & Dalton diecast tuners. 1 3/4" width bone nut; 25.4" scale length. Neck is straight & truss rod works fine.
Body: Solid Engelmann spruce top with flame maple binding. Ebony bridge & end pins with abalone dot inlays. Bone saddle, clear pickguard & abalone rosette. Solid Indian rosewood back & sides with flame maple binding. There are no electronics & the guitar weighs 4 lbs 9 oz.
Case: Original deluxe hardshell tweed case included.